Shop
Showing 25–36 of 36 results
- Concrete Repair and Protection
NEOREP HB
NEORep HB is a polymer and fiber modified mortar which has been designed to provide high strength repair mortar, shrink control and flexural strength. It possesses excellent bond characteristics to steel reinforcement and to concrete.
NEORep HB mortar is shrinkage compensated. It has low permeability and is extremely durable. NEORep HB contains no metallic aggregate and is chloride free.
NEORep HB is formulated for sprayed or trowelled applications; in thickness up to 50 mm in one layer by hand application. Greater thicknesses can be achieved when spray applied.
- Concrete Repair and Protection
NEOREP PG
NEORep PG is a high performance pourable micro concrete which has excellent shrinkage compensation and is highly fluid which requires only the onsite addition of clean water to produce a free-flowing micro concrete suitable for large volume concrete repairs at nominal thickness in excess of 50 mm.
- Waterproofing
NEOROOF FLEXSEAL 100
NEOProof FlexSeal 100 is a two-component polymer modified cementitious coating. The product may be trowel, brush or spray applied to provide a flexible, waterproof barrier.
- Tile Adhesive and tile grout
NEOTILE C1TE
NEOTile C1TE is a dry pre mix, waterproof, polymer fortified, and thin-set mortar for interior and exterior installation of ceramic tile, porcelain tile, Gauged Porcelain Tile Panels/Slabs (GPTP), stone, quarry tile, pavers and brick.
- Tile Adhesive and tile grout
NEOTILE C2TE
NEOTile C2TE is a dry pre mix, waterproof, polymer fortified, and thin-set mortar for interior and exterior installation of ceramic tile, porcelain tile, Gauged Porcelain Tile Panels/Slabs (GPTP), stone, quarry tile, pavers and brick.
- Tile Adhesive and tile grout
NEOTILE CG1
NEOTile CG1 is a High-Performance polymer modified cement-based powder blended with synthetic organic polymers and fillers. When added to water it gives smooth creamy paste to grout tile joints.
- Tile Adhesive and tile grout
NEOTILE CG2
NEOTile CG2 is a High-Performance polymer modified cement-based powder blended with synthetic organic polymers and fillers. When added to water it gives smooth creamy paste to grout tile joints.
- Tile Adhesive and tile grout
NEOTILE EG2
NEOTile EG 2 is a three-component solvent-free, water cleanable, antifungal and anti-bacterial epoxy resin based adhesive and grouting system, which provides excellent adhesion and chemical resistance in medium and heavy-duty corrosive and hygienic environments.
- Flooring
NEOTOP 500 SFB
NEOTop 500 SFB is a two-part epoxy resin system which produces a high build, hard wearing, chemically resistant floor coating. When required, NEOTop NS Grains may be included to produce a slip resistant surface.
- Flooring
NEOTOP EBM 200
NEOTop EBM 200 is a two-pack, solvent-free, thixotropic epoxy resin paste. The product produces a smooth layer suitable to receive further epoxy coatings or left as a bedding layer for pre-cast concrete units. TYPICAL USES
- Flooring
NEOTop Primer SF
NEOTop Primer SF is a high quality, epoxy sealer for porous surfaces and concrete. It is a ready to use product with excellent penetration properties and high resistance to abrasion and to chemicals. It is available in 2 grades: solvent based (SB) and solvent free (SF) suitable for close areas.
- Flooring
NEOTOP SLU10
NEOTop SLU 10 is a high bond strength, crack free, fast setting & hardening self-levelling, polymer modified cementitious underlay. NEOTop SLU 10 has been formulated to achieve a smooth flat surface with ease of application and maximum flow without any shrinkage or cracking.
