Shop
Showing 13–24 of 36 results
- Concrete Repair and Protection
NEOFINISH SRA
Chemical release agent suitable for mould and shutter faces prior to casting concrete in order to achieve a clean release. After removal of the formwork, the resultant concrete has a smooth hard uniform finish, with reduced incidence of blow holes. NEOFinish SRA can be applied to the formwork by spray in the form of a light uniform coating.
- Concrete Repair and Protection
NEOFINISH VB
Environmentally friendly, Vegetable Oil based mold release agent for concrete finish. PACTOFinish VB aids smooth and clean release of concrete from mould surface without pin holes and surface defects. Excellent solution where other types of mould release agents fail to perform.
NEOFinish VB will allow the subsequent application of rendering and paint according to the conditions defined by the professional practice rules for the application of coatings
- Concrete Repair and Protection
NEOFINISH WB
NEOFinish WB an emulsified blend of mineral oils and nonhazardous chemicals is specially formulated to produce release properties which are superior to those of conventional mould oils. NEOFinish WB is supplied as a sprayable white liquid, ready for direct application on site. The chemically reactive components in NEOFinish WB provide a water repellent interface which protects formwork and ensures an even color and texture in the cast concrete. In addition to preventing adhesion of concrete to formwork, NEOFinish WB will allow air to escape from the interface during concrete placing and vibration. The release of air minimizes surface blemishes and blow holes resulting in a substantial reduction in remedial costs.
- Precision Grouts
NEOGROUT 710 PCT
NEOGrout 710 PCT is a three component, solvent free resin system for pile encapsulation, treatment and waterproofing. It is supplied in a pre-weighed ready to use kit with high fluidity for ease of application.
- Precision Grouts
NEOGROUT EG 75
NEOGrout EG 75 is a solvent free, highly flowable, three component epoxy resin grouts specially designed for heavy engineering grouting where dynamic loads are encountered.
- Precision Grouts
NEOGROUT GP
NEOGrout GP is a cementitious grout, high strength shrinkage compensating pumpable grout. It is supplied as a ready to use dry powder, which requires only the on-site addition of water.
- Precision Grouts
NEOGROUT HS
NEOGrout HS is a cementitious, non-metallic, non- shrink and high early strength micro concrete grout. It is supplied as a ready to use pre-bagged dry powder, which requires only the on-site addition of water.
This non shrink grout is applicable for the grout gap thickness range of 10 – 100 mm
- Plasters
NEOMIX BLOCK FIX AAC
NEOMix BlockFix AAC is a cementitious block fixing for autoclaved aerated concrete blocks and calcium silicate blocks. It gives extended open time, has excellent workability and adhesion and ensures joint width is kept to a minimum, hence reducing plastering cost.
- Plasters
NEOMIX BLOCK FIX GP
NEOMix BlockFix GP is a dry pre- mixed, specially formulated block fixing and general-purpose mortar for fast laying masonry bricks a various type of blocks. It gives extended open time, has excellent workability and adhesion and ensures joint width is kept to a minimum, hence reducing plastering cost.
NEOMix BlockFix GP also gives excellent adhesion and eliminates the cause of thermal bridging associated with the use of traditional mortars.
NEOMix BlockFix GP can be mixed by hand or with any type of electrical mixer. It minimizes shrinkage and movement in masonry walls due to a controlled elasticity modulus.
- Plasters
NEOMIX BRC
NEOMix BRC is a ready mixed mineral bonding coat, to provide a mechanical key and improved adhesion for subsequent layers of fresh cement and gypsum-based plasters to the masonry blocks as well as concrete surfaces.
- Plasters
NEOMIX CP
NEOMIX CP is a dry pre mix cement plaster/render for internal and external use. The plaster is an ideal substrate for paint, wallpaper or decorative plasters.
- Concrete Repair and Protection
NEOREP FCF
NEORep FCF is a ready to use one component polymer modified cementitious product. It contains blended cement, graded sands, polymers and additives which improve Flexural and Tensile strength and provide shrinkage compensation. It requires only on-site addition of clean water.
